The Remington 700 has been one of the most renowned and loved American rifles for more than five decades. It stands among other well-known rifles used in the American Military Marksmanship and Sniper Units and is a top choice for hunters.
The Remington 700 delivers such an efficient performance, thanks to its scope, which allows shooters to dial in on targets and take shots with incredible accuracy.
Here, weโll be talking about the best scope mounts for the Remington 700 and their features. Weโll discuss the main features of each model on our list and the characteristics to consider before choosing one. Letโs get started.
At a Glance: Our Top Picks for Remington 700 Scope Mounts
- OUR TOP PICK: Sphur Quick Detach ISM QDP Mount
- RUNNER-UP: Leupold Mark 2 IMS Cantilever Scope Mount
- BEST BUDGET OPTION: Nightforce Unimounts
Comparison of the Best Remington 700 Scope Mounts
| IMAGE | PRODUCT | |
|---|---|---|
Our Top Pick  |
| View Latest Price โ |
 |
| View Latest Price โ |
Best Budget Option  |
| View Latest Price โ |
 |
| View Latest Price โ |
 |
| View Latest Price โ |
What to Look For in a Scope Mount
Before discussing these sought after factors, we must identify the various types of mounts available for the Remington 700. There are three basic types of mounts for this rifle. Namely, the one-piece scope rings, two-piece scope rings, and quick detach systems.
One-Piece Scope Rings/Mounts
The one-piece scope rings or mounts can be referred to as old dovetail mounts. These mounts have a base that can be screwed to the receiver and used in conjunction with parallel-aligned split rings to insert and tighten the scope.
These types of scope mounts are durable and easy to adjust or install, as you donโt have to align them. Just place the base over pre-tapped holes and screw it into place.
Two-Piece Scope Rings/Mounts
On the other hand, two-piece scope mounts are just one-piece mounts split into two. The rear part is screwed to the receiver's end (just before the charging handle), whereas the other one is placed further up (ahead of the ejection port).
You may encounter problems while aligning these parts if your rifle is not pre-tapped/pre-drilled for alignment. But, the best part of using these mounts is that you can adjust the distance between the front and rear rings. This means you can create space to facilitate loading ammunition into your REM 700, even while wearing gloves.
Quick Detach Systems
Finally, we have the quick detach systems, or commonly known as Picatinny or Weaver rail systems. This is a rail system which can be tapped on to the receiver, allowing the scope to be quickly attached or detached. Such mounts are sometimes preferred for long-range shooting, as the scope is more adjustable for eye relief and the mount is very stable.
Scope Mount Materials
Another important point to consider is the material of a scope mount. Nowadays, thereโs a wide variety available, ranging from alloys to steel. Most people prefer aluminum mounts, as they are light and sturdy.
Stainless steel mounts are a more conventional option, as theyโre more durable, but often heavy. Steel and aluminum alloy mounts offer a good combination of strength, durability, and weight.
What Size Scope Mount Do I Need?
The short answer: it depends. Firstly, it depends on the size of the scope itself. Itโs important to measure the scopeโs length and diameter before you make the determination.
So, keep in mind the length and objective size (among other measurements) before you make a decision. If the scope is long in length or has a good-sized objective (approximately 40 mm or larger), you may want to find a longer scope mount that can fit your rifle.
Permanent vs. Quick Release
Permanent scope mounts are generally useful for hunting and target practice, whereas quick release scope mounts are good for tactical applications. A permanent mount has a competitive advantage over quick release mounts in regards to durability. Permanent mounts can easily withstand the recoil of magnum calibers too and are perfect for close-quarter hunting or target practice.
Quick release scope mounts allow the shooter to remove the scope whenever they please. The shooter can reattach the scope at a moment's notice and prepare it in a matter of seconds.
The mounted scopes are excellent for long-range shooting and offer great accuracy as they help keep the scope in sync with the rifle. This acts as an added benefit for making quick release mounts an ideal pick for long-range shooting rifles like the Remington 700.
Review of the Best Remington 700 Scope Mounts
Below is a list of the five best Remington 700 scope mounts currently on the market. As you go through each of them, it is important to note the characteristics and features of each one. If you have a good idea of how scope mounts work, you might have an idea of what your ideal mount would look like. If you find one thatโs close enough to it, then youโll know for a fact that itโs worth buying.
Based upon the aforementioned qualities and factors, we have outlined five of the best scope mounts for the Remington 700. These include one-point, two-point, and quick detachable (QD) models. Now, letโs take a look at the first scope mount on our list:
Best Overall:
Sphur Quick Detach ISM QDP Mount
Pros
Cons
What Recent Buyers Report
Most new users were pretty impressed by the scope mount. They considered this to be really reliable and did a great job working with all kinds of one-inch scopes. One user was surprised when he had a scope with a 40 mm objective and it managed to fit on this mount, in particular. Overall, the durability and build were quite solid and installation took a mere five minutes or less.
Why it Stands Out to Us
The scope mount is made from billet aluminum and has an added finish to ensure itโs one of the most durable scope mounts on the market. So it will definitely take on bumps and scrapes and will even absorb a good deal of shock that would otherwise throw off a scopeโs zero settings. If you really want a solid scope mount that proves itself as one of the toughest in the business, this mount might just be what you need.
Sphur is a renowned brand and are professionals when it comes to manufacturing scope mounts. This QD ISM Mount from Sphur is a masterpiece. Itโs a quick detach scope mount and fits the standard MIL-STD-1913 Picatinny rail scope base. This feature allows you to detach the scope and mount as a single unit from your Remington 700 with the help of a quick release lever.
Who Will Use This Most
This would be ideal for those looking for a quick detach scope mount to fit onto most Remington 700 rifles. So, if you have this on an old rifle and want to switch this mount to a new one, youโll be able to do that rather quickly. Oh...and you wonโt have to reset your zero settings at all. They will stay intact no matter how many times you switch it out.
Bottom Line
The Spuhr Quick Detach Mount is the real deal in the eyes of many Remington 700 users. It is built tough and will keep your scope intact for the long run once you install it. Youโll be able to enjoy better shooting and even greater hit probability with the help of this scope mount. If you want something that is a textbook example of how a scope mount works, this one might be a good option.
The mount has 45-degree split rings, so the bulkiest section of the rings does not interfere with your line of sight. As an innovative feature, this scope mount features a bubble-level built into the base, to help you level the rifle for long-range shooting.
It can accommodate a variety of scope tube diameters, too. The mount has been manufactured from a single billet of aluminum which makes it durable and built to last.
Runner-up:
Leupold Mark 2 IMS Cantilever Scope Mount
Pros
Cons
What Recent Buyers Report
When new buyers learned this mount was able to resist all kinds of shock (including thermal shock), they were seriously impressed with the mount. They installed this on their rifles with ease and managed to add on their scope of choice. Most new users had one-inch scopes that were perfect for Remington 700 hunting and target shooting. The durability was so solid that the scopeโs zero settings managed to stay on through well over 100 shots, according to one user.
Why it Stands Out to Us
The Leupold brand is known for making one of the most durable scopes in the world. In fact, they might be considered one of the higher-end brands on the market. So itโs no surprise they offer a scope mount with exceptional durability and superior shock absorption. This might be one of the best scope mounts on the market for a few good reasons. Itโs guaranteed to protect your scope from shock and will make resetting your zero constantly a thing of the past.
The Leupold Mark 2 Integral Mounting System (IMS) Cantilever Scope Mount is a one-piece scope mount, which fits on a standard MIL-STD-1913 Picatinny bases. This scope mount has been manufactured from aluminum and is very lightweight.
It attaches securely to your Remington 700 using a couple of ยฝ-inch hex nuts on the cross bolts, making for quick release and installation. The lifted front reduces some weight from the base, making the entire setup lightweight.
Who Will Use This Most
This will be used for heavy-duty applications like tactical and hunting. Better yet, if you have a heavy-hitting rifle that needs a scope mount, this might be exactly what you need. Itโs tough enough to handle shock even from some of the heaviest recoil. Not bad for a little unit made from high-quality aluminum.
Bottom Line
The Leupold Mark 2 IMS Cantilever Scope Mount is certainly worth the investment if you want a scope mount that will be nothing but a protectant for your favorite scope. It doesnโt matter which scope you use, you set your zero up and this mount is guaranteed to protect it through so many rounds. Since itโs from a brand known for durability, why not take the chance to give this a go?
The mount eliminates the need for any risers or specialized optics with shortened eye relief. These scope mounts are lightweight, easy to adjust, and have a quality construction to endure rigorous use.
This makes them perfect for hunting, tactical use, and three-gun competitions. As an added bonus, the product is also covered by Leupoldโs full lifetime guarantee.
Best for the Money:
Nightforce Unimounts
Pros
Cons
What Recent Buyers Report
Many users were satisfied with the mountโs durability. Considering that itโs made from 7075-T6 aluminum, they knew they made the right investment. They installed this in a few minuteโs time and managed to install their favorite scope. A handful of them had scopes with large objective scopes. One user said he chose this mount because he was not willing to give up a scope that gave him so much coverage and quick target acquisition. So far, he isnโt complaining about this mount.
Why it Stands Out to Us
The mount is a simple, straightforward design that you can rely on for keeping your scope in place. All it takes is for you to install this on your rifle and then tack on your favorite scope of choice. In fact, since it can accept a lot of scopes with large objectives, it certainly stands out as one of the odds-on favorites for hunters. Whether you are a big game or small game hunter that uses a Remington 700, you might like this scope mount for a few good reasons. Its ability to keep a scope secure, along with its ability to handle the larger scopes, will probably be enough for you to grab this off the shelf.
The Nightforce Unimount is a one-point scope mount made from aluminum and features a matte black finish. It has a height of 1.125 inches and is apt for scopes up to 30 mm in diameter.
Who Will Use This Most
This will be a great hunting scope mount. Itโs built for the woods and will handle large scopes with ease. It will keep your scopes intact and wonโt allow for a single millimeter of wiggle room. Itโs a scope mount that will last you a good long time because of its durability, so if you want something that might be the last scope mount youโll ever buy for a long time, this might be it.
Bottom Line
The Nightforce Unimount has a simple design that will make installing it (and your scope of choice) a whole lot easier. Nothing too complicated is included. Just tack this puppy on and youโll have a mount worth putting to good use, no matter if you hunt or shoot targets casually.
The mount can be attached to the Picatinny rail of your Remington 700 rifle using two ยฝ" hex screws on the sides. These screws can be turned by bare hands, which makes attaching and detaching the mount easier. The mount is good for hunting and target practice.
4. Vortex Optics Viper Extended Cantilever Mounts
Pros
Cons
What Recent Buyers Report
Most new buyers were happy with the mount due to its durability and ability to handle all kinds of Remington 700 scopes (especially those with a good amount of eye relief). One user even said his scope had such a generous amount of eye relief that he wasnโt sure if the mount would be a good match for it. Sure enough, he fit it on there and put the scope to good use on his latest hunting trip. He added that it was simple to install and able to handle all kinds of shock that originated from recoil.
Why it Stands Out to Us
Once again, this is one of those scope mounts that is pretty simple in terms of design. So all you have to do is install the mount as-is before you install your scope of choice. And since itโs made from high-quality aluminum, the last thing youโll see is the mount getting easily damaged. Itโs a pretty dang solid mount built to give you years or even decades of faithful service, so long as you take good care of it from time to time.
This Vortex Optics Scope Mount features solid construction with the correct height and forward placement for proper scope mounting. This one-point scope features a matte black finish and can be easily installed to a Picatinny or Weaver base. The scope mounting screws are vertical instead of horizontal, which makes the installation even easier.
Who Will Use This Most
This scope mount will be one of a handful of mounts perfect for beginners who have yet to put a Remington 700 rifle to good use. Since itโs a mount that is compatible with most scopes, you wonโt have to spend time trying to fret or fuss with the installation process of both the mount and scope itself. If simple is what you want, youโll get it with this mount.
Bottom Line
The Vortex Viper Extended Cantilever Mount is one of the most straightforward and durable scope mounts on the market. If you want something that allows for no-fuss use and will keep your scope straight and secure, this mount will be your best possible option. And believe it or not, itโs one of the most affordable scope mounts on the market. So if you are on a budget, this might be one of the best quality mounts you can afford.
Different variants are available for scopes with one-inch, 30 mm, and 34 mm scope diameters, each featuring a height of 1.435โ from the base. The eye relief offered with this scope is outstanding and retains zero, even after burning through thousands of rounds. The only drawback is the extra weight of the scope mount compared to others.
5. Talley Lightweight Scope Mount
Pros
Cons
What Recent Buyers Report
A lot of new users were looking for a scope mount that was the closest thing to scope rings. Sure enough, they found these and were not disappointed. They installed these in a couple of minutes flat and followed it up with installation of their favorite scope of choice. The mount was able to fit many one-inch scopes. One user said he uses a one-inch scope for target shooting and found the fit to be nice and snug.
Why it Stands Out to Us
Scope rings are known to be one of the most reliable types of scope mounts on the market. Not to mention, theyโve been around for quite a long time. Why are they reliable? Because they hold a scope in place and keep it on the straight and narrow. So you get no wiggle room with these scope rings. If you want scope rings that are not your fatherโs or grandfatherโs scope rings, these just might be what youโre looking for.
The Talley Lightweight Scope Mount features a solid steel body with a matte black finish and accepts scopes up to one-inch in diameter. This mount is available in four different height variants: low, medium, high, and X-high.
Who Will Use This Most
If you want scope mounts that will keep your scope nice and secure and also protected from all kinds of shock that can throw off a scopeโs zero, youโll know these scope rings will be the best choice for you. These are so much more durable than the scope rings of ages old. And your father would probably envy you for having them.
Bottom Line
The Talley Light Weight Scope Mounts are the kind of mounts a scope ring enthusiast can dream of. If you want the reliability of scope rings from ages past with an added amount of durability to it, then youโll want to give these a closer look. Once you give these a try, youโll probably wonโt find any other scope mount that can match their performance.
The mount comes complete as a single-piece construction, being that the base of the scope rings and the mount base are molded from the same piece of steel. Each ring cap is 5โ8" wide, with four TORX screws to keep large scopes from slipping or shifting. Overall, this is an excellent scope for hunting and shooting competitions.
Choosing The Right Height
There are many different types of scopes available and each offer their own unique advantage. Different scopes have different diameters, making height an important consideration when choosing scope mounts.
Long-range scopes are more powerful and generally have larger scope diameters (due to the objective size). This may cause the scope to touch your barrel or not be properly leveled. The barrel and scope must be close enough for accurate shooting, hence, you must choose a scope mount to match your preferred optic choice.
Consider the height of your scope mount and the diameter of the scope rings to properly accommodate the optic scope. With this, scope height is often a matter of personal comfort and intended use, so choose which height is best for you.
One-Piece, Two-Piece, or Mounted?
As you know, there are three different types of scope mounts. But the question is - which one do you choose?
To answer this, youโll have to identify what each one is best for. A one-piece scope mount is very easy to install. It offers a stable base and the option to change scopes when needed. However, one-piece mounts are heavy and may make the action prone to warping when the screws are tightened.
On the other hand, the two-piece scope rings/mount are lightweight. Although these scopes take the same time and effort as a one-piece mount to install. Two-piece rings also allow the user to adjust the area between the two rings. Two-piece rings are lightweight and use four screws to attach themselves firmly to the rifle.
Quick detach scope mounts, like Picatinny rails, are perfect for long-range shooters and people who prefer to change optics with ease or leave them untouched. Such mounts also offer users the liberty to quickly switch between scopes and other accessories. Additionally, these grant the option to detach the scope for safe transportation and storage.
Conclusion
The Remington 700 is a classic American rifle which is widely used for hunting and long-range shooting. There are old style one-piece models, two-piece, and the most modern, quick detachable scope mounts.
You must consider the material, durability, height, intended application, resistance to recoil, and stability of a scope mount before pulling the trigger on your final choice. A good scope mount must be easy to install, lightweight, and work in sync with your Remington 700 rifle.
We hope this has helped you outline some scope mounts and leads you down the path to your next purchase!
